GoPowerSports

150cc Flywheel Puller

150cc Flywheel Puller (Male) 27mm x 1.0mm Fine Left Hand Threads

Predator Engine Mount 2 (301cc / 420cc / 670cc)

Predator Engine Mount 2   6-3/4" x 16" 3-5/8" x 3/8" Mounting Slots   1" 90 Degree Lip on each side 1/4" (.250") Steel Plate Works with 301cc, 420cc, and 670cc Predator...

Retainer Kit (18lb, 22lb, 26lb)

Retainer Kit Great upgrade for Valve Train using High Lift Camshafts such as the .275 or .308 Cams Adds more control of the Valve at higher RPMs Includes 2 Retainers and 4 Keepers Pair with...

Silicone Header Sleeve 20"

Silicone Header Sleeve Silicone Outer Construction Fiberglass Inner Construction Does not require Wire Ties or Clamps Sleeve will smoke the first few times after it's newly installed 20"...

Max-Torque Centrifugal Clutch for Bicycle Chain 410, 415

Max-Torque Centrifugal Clutch For Bicycle Chain 410, 415 5/8" or 3/4" Center Bore with 3/16" Key Way 10 Tooth Sprocket Works with 410 and 415 Chain - 1/2" pitch Comes with Key, 2 Set Screws,...

Mod2 Camshaft (212cc Tillotson / Hemi Predator / 196cc Clone / GX200)

Mod2 Camshaft  Fits a very wide range of applications This Cam has a lift measurement that is very similar to the CL1, CL2, CL3, BSP3, and other stock legal Cams, but has much more added...

Front Fender Bracket, 2 Bolt Style Passenger - 150cc / 200cc XRS/X

TrailMaster 2 Bolt Front Fender Bracket   Fits: TrailMaster 150-XRS Go Kart TrailMaster 150-XRX Go Kart TrailMaster 200E-XRS Go Kart TrailMaster 200E-XRX Go-Kart 

Mod2 Camshaft (212cc Non-Hemi Predator)

212cc Non-Hemi Predator (#69730 Only) Mod2 Camshaft Fits a very wide range of applications This Cam has a lift measurement that is very similar to the CL1, CL2, CL3, BSP3, and other stock...

90 Degree Fuel Filter

90 Degree Fuel Filter Fits: 196cc Clone Engines Predator 212cc Engines GX200 Engines Typically used on engines utilizing the upgraded Top Plate and Fuel Pump design. When filter is connected...

410 x 3.50-5" Stud Tire, Original

Studded 2 Ply Tire Fits on 5" Diameter Wheel 12" Tall 3.5" Wide 

Clone PVL Flywheel

Clone PVL Flywheel Material: Die Cast Aluminum Weight: 3.8 lbs Timing: 28 Degrees Dynamically balanced and has been tested by PVL at 17,000 RPM. Steel Center Hub adds durability to keep from...

18lb Valve Springs

18lb Valve Springs Not recommended for any Cam with a .274 lift or higher Billet Connecting Rod and Billet Flywheel are recommended but not required Works with both Hemi and Non-Hemi...