GoPowerSports

1" Bore Hub with 1/4" Keyway

1" Bore Hub with 1/4" Keyway Outer Diameter 1.876"  Machined Lip 1.678" Comes with 2 Set Screws

Header Pipe, Build Your Own

Build Your Own Header Pipe 1" Diameter Fits: 212cc (Hemi and Non Hemi) 301cc 420cc We strongly recommend using the Header Support to prevent pipe from breaking. Recommended...

1" Sprocket and Drum Mounting Hub

Hub for Mounting Sprocket or Brake Drum to 1" Axle 4 Bolt Pattern Mount 2-7/8" & 3-1/8" 4" Outer Diameter Uses 1/4" Key Set includes: 2 Set Screws (5/16"-18) 4 Bolts 4 Lock...

150cc Flywheel Puller

150cc Flywheel Puller (Male) 27mm x 1.0mm Fine Left Hand Threads

Predator Engine Mount 2 (301cc / 420cc / 670cc)

Predator Engine Mount 2   6-3/4" x 16" 3-5/8" x 3/8" Mounting Slots   1" 90 Degree Lip on each side 1/4" (.250") Steel Plate Works with 301cc, 420cc, and 670cc Predator...

Retainer Kit (18lb, 22lb, 26lb)

Retainer Kit Great upgrade for Valve Train using High Lift Camshafts such as the .275 or .308 Cams Adds more control of the Valve at higher RPMs Includes 2 Retainers and 4 Keepers Pair with...

Silicone Header Sleeve 20"

Silicone Header Sleeve Silicone Outer Construction Fiberglass Inner Construction Does not require Wire Ties or Clamps Sleeve will smoke the first few times after it's newly installed 20"...

Max-Torque Centrifugal Clutch for Bicycle Chain 410, 415

Max-Torque Centrifugal Clutch For Bicycle Chain 410, 415 5/8" or 3/4" Center Bore with 3/16" Key Way 10 Tooth Sprocket Works with 410 and 415 Chain - 1/2" pitch Comes with Key, 2 Set Screws,...

Mod2 Camshaft (212cc Tillotson / Hemi Predator / 196cc Clone / GX200)

Mod2 Camshaft  Fits a very wide range of applications This Cam has a lift measurement that is very similar to the CL1, CL2, CL3, BSP3, and other stock legal Cams, but has much more added...

Front Fender Bracket, 2 Bolt Style Passenger - 150cc / 200cc XRS/X

TrailMaster 2 Bolt Front Fender Bracket   Fits: TrailMaster 150-XRS Go Kart TrailMaster 150-XRX Go Kart TrailMaster 200E-XRS Go Kart TrailMaster 200E-XRX Go-Kart 

Mod2 Camshaft (212cc Non-Hemi Predator)

212cc Non-Hemi Predator (#69730 Only) Mod2 Camshaft Fits a very wide range of applications This Cam has a lift measurement that is very similar to the CL1, CL2, CL3, BSP3, and other stock...

90 Degree Fuel Filter

90 Degree Fuel Filter Fits: 196cc Clone Engines Predator 212cc Engines GX200 Engines Typically used on engines utilizing the upgraded Top Plate and Fuel Pump design. When filter is connected...