Engine

Full Top Plate Throttle Mechanism

Full Top Plate Throttle Mechanism Includes: Mounting Bolts Throttle Mechanism Top plate Spring  Fitments 196cc clones Honda GX200 212cc Predator Hemi 212cc Tillotson This plate is NOT designed for a Non Hemi 212cc Predator Engine...

Header Support

Header Support Bracket Prevents Header Pipe from breaking Recommended when using a Muffler Does not come with hardware Header Support Kit Includes: Steel T-Bar Hose Clamp T-Bar Overall Dimensions: 11.25" x 4"

Carburetor For TrailMaster 300-XRX

OEM Carburetor for the TrailMaster 300-XRX

AKRA / NKA Clone Engine by PC Motorworks

Our National Level AKRA/NKA Engine have spent years in development and we're squeezing out every last bit of horsepower possible. We machine and hand pick all of the components that go into these engines to give you an every advantage. Our Cylinder...

TrailMaster 300cc Fan

Radiator fan for TrailMaster 300cc Go Karts

ARC Billet Flywheel: 212cc Non-Hemi Predator

ARC Billet Flywheel: 212cc Non Hemi Predator (6625)  Does NOT fit the Predator Ghost Fits Non Hemi Predator Engine # 69730 Highly recommended for engines with Valve Springs capable of withstanding more than 5500 RPM, and is...

Advance Timing / Offset Key

Advance Timing / Offset Key Custom ground Flywheel Key to advance the Ignition Timing Fits: BSP 196cc Engines Honda GX200 Engines Predator 212cc Engines Most 6.5HP Chinese OHV Engines    

150cc Belt Cover Gasket

150cc Belt Cover Gasket Used on 150cc Go Karts with Forward, Neutral, and Reverse

Header Pipe, Build Your Own

Build Your Own Header Pipe 1" Diameter Fits: 212cc (Hemi and Non Hemi) 301cc 420cc We strongly recommend using the Header Support to prevent pipe from breaking. Recommended Items: Header Support 1" Muffler 1" Trumpet...

Predator Engine Mount 2 (301cc / 420cc / 670cc)

Predator Engine Mount 2   6-3/4" x 16" 3-5/8" x 3/8" Mounting Slots   1" 90 Degree Lip on each side 1/4" (.250") Steel Plate Works with 301cc, 420cc, and 670cc Predator Engines.

Retainer Kit (18lb, 22lb, 26lb)

Retainer Kit Great upgrade for Valve Train using High Lift Camshafts such as the .275 or .308 Cams Adds more control of the Valve at higher RPMs Includes 2 Retainers and 4 Keepers Pair with 1051 Lash Caps and Stainless Steel Valves  Fits...

Silicone Header Sleeve 20"

Silicone Header Sleeve Silicone Outer Construction Fiberglass Inner Construction Does not require Wire Ties or Clamps Sleeve will smoke the first few times after it's newly installed 20" Length The Silicone Header Sleeve 20" is a high-quality...

Mod2 Camshaft (212cc Tillotson / Hemi Predator / 196cc Clone / GX200)

Mod2 Camshaft  Fits a very wide range of applications This Cam has a lift measurement that is very similar to the CL1, CL2, CL3, BSP3, and other stock legal Cams, but has much more added duration to hold the Valves open longer giving you more...

Max Torque Bully Conversion Kit

Only one set of Drive Sprockets that are compatible with your Max Torque Drum Clutch, as well as Bully Style Disc Clutches, are necessary. The Kit Includes: Stamped Steel Drum 1 Large Flat Washer 1 Fiber Washer 2 Thrust Washers Installation...

Mod2 Camshaft (212cc Non-Hemi Predator)

212cc Non-Hemi Predator (#69730 Only) Mod2 Camshaft Fits a very wide range of applications This Cam has a lift measurement that is very similar to the CL1, CL2, CL3, BSP3, and other stock legal Cams, but has much more added duration to hold the...

Throttle Clevis

Throttle Clevis Commonly used to connect the Throttle Cable to the Throttle Arm on Top Plate Can be utilized in many other cable connecting manners No returns on this product. If you have any questions, please call before ordering.

90 Degree Fuel Filter

90 Degree Fuel Filter Fits: 196cc Clone Engines Predator 212cc Engines GX200 Engines Typically used on engines utilizing the upgraded Top Plate and Fuel Pump design. When filter is connected between carburetor and fuel pump, the fuel line is...

Clone PVL Flywheel

Clone PVL Flywheel Material: Die Cast Aluminum Weight: 3.8 lbs Timing: 28 Degrees Dynamically balanced and has been tested by PVL at 17,000 RPM. Steel Center Hub adds durability to keep from damaging the taper Steel Center Hub also has tapped...

18lb Valve Springs

18lb Valve Springs Not recommended for any Cam with a .274 lift or higher Billet Connecting Rod and Billet Flywheel are recommended but not required Works with both Hemi and Non-Hemi Engines No Returns on this product. If you have questions,...

Air Filter Adapter, 196cc / 212cc / 225cc Engines

Air Filter Adapter, 196cc / 212cc / 225cc Engines 2-7/16" OD Air Filter Adapter for K&N Style Air Filter Fits both Hemi and Non-Hemi Engines