TrailMaster Go Kart Parts

Engine Start Button

Engine Start Button Commonly used on TrailMaster and Hammerhead Go Karts of all sizes

Diode

150cc Diode   No returns on this product. If you have questions, please call before ordering. 

Engine Stop Button

Engine Stop Button used on TrailMaster Go Karts, HammerHead Go Karts, and many other Chinese Go Karts.   No returns on this product. If you have questions, please call before ordering. 

Ignition Switch - 3-Screws

Ignition Switch for older HammerHead 150cc Go Karts 3 Screws Located in Back   No returns on this product. If you have questions, please call before ordering. 

20x7-8 Front Chrome Wheel Assembly, 150cc / 200cc / 300cc Passenger Side

Passenger Side Aluminum Mag Wheel Assembly with 20x7-8 Tires  7" Wide Wheel Center Hole: 4 1/2" Diameter Bolt Hole Pattern: 4 5/16" (110mm) Measuring Across Center Hole

20x7-8 Front Wheel Assembly, 150cc / 200cc / 300cc Driver Side

 Driver Side Aluminum Mag Wheel Assembly with 20x7-8 Tires 7" Wide Wheel Center Hole: 4 1/2" Diameter, Bolt Hole Pattern: 4 5/16" (110mm) Measuring Across Center Hole

Brake Cable 47.5", Mini Go-Kart

Used on TrailMaster Mini Go Karts and Hammerhead Go Karts with 5.5 HP Engines 47.5" Overall Length

Throttle Cable 61.5", Mini Go-Kart

Used on TrailMaster Mini Go Karts and HammerHead Go Karts with 5.5 HP Engines 61.5" Overall Length  

Rectifier Regulator 150cc

Commonly used on the HammerHead GTS 150cc Go Karts. This Regulator works on all 150cc Go Karts, but new mounting holes may need to be drilled on the electrical box cover and the Regulator will need to be mounted externally.   4 Wire Plug...

Blinker Switch Unit

150cc / 250cc Turn Signal Switch   No returns on this product. If you have questions, please call before ordering. 

Master Cylinder, Go Kart 150/300

Master Cylinder for 150 and 200cc Go-Karts.   Commonly Used On: TrailMaster 150cc /200cc / 300cc Go Karts Hammerhead 150cc/250cc Go Karts Carter Go Karts American Sportworks Go Karts Many other Chinese brands of Go Karts Does not...

Control Relay - HHSS

Replacement Control Relay, which is located in the dash.   No returns on this product, if you have questions about it, please call before ordering. 

3/16" Inline Fuel Filter

Inline Fuel Filter 3/16" Nipples on Both Sides

Fuel Cap

This Fuel Cap can be used on many different models of HammerHead, TrailMaster, American Sportworks, Carter and other Chinese Go Karts.  

150CC Reverse Cable 61" (External Reverse)

Works on all 150 Series HammerHead and Carter Go Karts with external reverse units. 61" Overall Length Round Ball on Both Ends.

150CC Reverse Cable 61" 2-Pack

This reverse cable works on all Hammerhead 150cc Go-Karts, as well as most Carter and various Chinese Go-Karts with external reverse units. 61" Overall Length Round Ball on Both Ends

Ignition Switch 5-Wire (GT)

This Ignition Switch plugs into a 5 wire receiver which located in the wiring harness. Only 3 wires will be used. This switch works on the Hammerhead GT model Go Karts.   Does not work with the Carter 5 Wire Key Switch.   No return on this...

Fuel Tank, TrailMaster Mini/Mid

This Black Fuel Tank fits the TrailMaster Mini and Mid Go Karts. This tank can also be used on many Hammerhead Go Karts that are similar in size.     Fuel Cap and Petcock are not included.

Lower Suspension Arm, TrailMaster Mini

Lower Suspension Arm for TrailMaster and Hammerhead Mini karts.

Upper Suspension Arm, TrailMaster Mini/MidXRS

This Upper Suspension Arm is used on the TrailMaster Mini XRS and Mid XRS, and most smaller sized Go-Karts.