Plastic Torque Converter Cover, 40 Series

40 Series Torque Converter Cover Plastic Uses (5) 1/4" x 3/4" Bolts (Not Included)

Tillotson TCT Mechanical Fuel Injection TF-8A-6C

Tillotson TCT Mechanical Fuel Injection Carburetor This is a direct replacement for your Predator 212cc or any Honda 6.5hp Clone Carburetor. Under load, the Fuel Injection is amazing and keeps on pulling. This system allows you to adjust fuel...

150cc, 300cc Brake/Starter Relay

Brake Starter Relay for Go Karts that require the brake pedal depressed in order to start Engine Fits: Newer TrailMaster 150cc Go Karts Newer TrailMaster 300cc Go Karts TrailMaster No returns on this product. If you have any questions, please...

50lb Heavy Duty Valve Springs, GX240-390, Predator 301cc / 420cc

50lb Heavy Duty Valve Springs Fit: Honda GX 240 Engines Honda GX 270 Engines Honda GX 340 Engines Honda GX 390 Engines Predator 301cc Engines Predator 420cc Engines Approximately: 50 lbs at 1.125" installed Height 42 lbs at 1.2", with 110...

TrailMaster 300cc Stator

TrailMaster 300cc Stator Will not fit on HammerHead 250cc Go Karts No returns on this product. If you have any questions, please call before ordering.

TrailMaster 300cc Regulator Rectifier

TrailMaster 300cc Regulator Rectifier Will not fit HammerHead 250cc Go Karts No returns on this product. If you have any questions, please call before ordering. 

Ignition Coil, TrailMastser 300cc

TrailMaster 300cc Ignition Coil Will not fit on HammerHead 250cc Go Karts No returns on this product. If you have any questions, please call before ordering. 

TrailMaster 300cc Electric Choke

TrailMaster 300cc Electric Choke Will not work on Hammerhead 250cc Go Karts No returns on this product. If you have any questions, please call before ordering.

Carburetor for Honda GX390 and Predator 420

Stock Replacement Carburetor Honda GX390 Engines Predator 420 Engines

40 Series Driver 1" Bore, Comet

40 Series Comet Driver 1" Bore Uses 7/8" Wide Belt Rated for 8HP-16HP Engines

6" Minibike Drive Wheel - Shallow

Mini-Bike Drive Wheel, Shallow For 6" tires Wheel Width: 4" OD Mount Sprocket on one side, Brake on other Hub Width: 5-3/4" Stud Spacing: 2 7/8" Across Bore Studs: 3/8" Diam x 1-1/4" Length Uses 1-3/8" OD Bearings (Commonly, 5090...

6" Mini Bike Drive Wheel - Wide

Mini-Bike Drive Wheel, Wide Version For 6" tires Wheel Width: 5-1/4" OD Mount Sprocket on one side, Brake on other Hub Width: 7" Stud Spacing: 2-7/8" Across Bore Studs: 3/8" Diam x 1-1/4" Length Uses 1-3/8" OD Bearings (Commonly, 5090...

Engine Mount Link, Collar

Engine Mount Link Collar Used on 150cc and Mid Sized Karts

Engine Mount Link, Spacer

Engine mount Link Spacer Used on 150cc and Mid Sized Karts

Engine Mount Link, Cushion

Engine Mount Link Cushion Used on 150cc and Mid Sized Karts

Engine Mount Link, Washer

Engine Mount Link Washer Used on 150cc and Mid Sized Karts

Engine Mount Link, 12mm Lock Nut

Engine Mount Link 12mm Lock Nut Used on 150cc and Mid Sized Go Karts

HP Lash Caps - Set of 2

5.5mm Ultra Light Lash Caps Fits: First Generation 212cc Predator Engines Hemi 212cc Predator Engines 196cc Clones Engines Honda GX200 Engines No returns on this product. If you have any questions, please call before ordering. 

Chromoly Push Rods: All 6.5HP Small Blocks, Cut To Length

High Strength Cut To Length Chromoly Push Rods When shortening the columns more that 3/8" it will be necessary to re-size the hole with a .125" reamer to a depth of .250" Once the length has been adjusted, clean and deburr the columns, apply Loctite...

Chromoly Push Rods: 5.26"

Heavy Duty Chromoly Push Rods 5.26" Long Considerably stiffer than Stock Push Rods Use with all HD Springs Capable of 10,000 RPM+ Sold as a pair The following are recommendations only and may not work for all applications. See notes for...