Engine

Tillotson TCT Mechanical Fuel Injection TF-8A-6C

Tillotson TCT Mechanical Fuel Injection Carburetor This is a direct replacement for your Predator 212cc or any Honda 6.5hp Clone Carburetor. Under load, the Fuel Injection is amazing and keeps on pulling. This system allows you to adjust fuel...

50lb Heavy Duty Valve Springs, GX240-390, Predator 301cc / 420cc

50lb Heavy Duty Valve Springs Fit: Honda GX 240 Engines Honda GX 270 Engines Honda GX 340 Engines Honda GX 390 Engines Predator 301cc Engines Predator 420cc Engines Approximately: 50 lbs at 1.125" installed Height 42 lbs at 1.2", with 110...

Ignition Coil, TrailMastser 300cc

TrailMaster 300cc Ignition Coil Will not fit on HammerHead 250cc Go Karts No returns on this product. If you have any questions, please call before ordering. 

Carburetor for Honda GX390 and Predator 420

Stock Replacement Carburetor Honda GX390 Engines Predator 420 Engines

HP Lash Caps - Set of 2

5.5mm Ultra Light Lash Caps Fits: First Generation 212cc Predator Engines Hemi 212cc Predator Engines 196cc Clones Engines Honda GX200 Engines No returns on this product. If you have any questions, please call before ordering. 

Chromoly Push Rods: All 6.5HP Small Blocks, Cut To Length

High Strength Cut To Length Chromoly Push Rods When shortening the columns more that 3/8" it will be necessary to re-size the hole with a .125" reamer to a depth of .250" Once the length has been adjusted, clean and deburr the columns, apply Loctite...

Chromoly Push Rods: 5.26"

Heavy Duty Chromoly Push Rods 5.26" Long Considerably stiffer than Stock Push Rods Use with all HD Springs Capable of 10,000 RPM+ Sold as a pair The following are recommendations only and may not work for all applications. See notes for...

Chromoly Push Rods: 5.54"

Heavy Duty Chromoly Push Rods 5.54" Long Considerably stiffer than Stock Push Rods Use with all HD Springs Capable of 10,000 RPM+ Sold as a pair The following are recommendations only and may not work for all applications. See notes for...

Fitting, Pulse/Vent, 1/4" Hose

Fitting, Pulse/Vent, 1/4" Hose Installed on the Valve Cover / Engine Block / Side Cover to pulse the Fuel Pump DIY Instructions: Drill Hole with a 11/32" Drill Bit Use NPT 1/8" -27 NPT Threads with a 1/4" Hose Barb No returns on this product...

Stainless Steel Valve Kit: 212cc Predator

Fits: 212cc Hemi Predator Newer 212cc Non Hemi Predators (Will need to either replace guides to 5.5mm, or ream) Other Details: A must have for applications above 8,000 RPMs Valves will need to be lapped in to Seats Will not fit 1st Generation...

Stainless Steel Valve Kit: 196cc Clones / GX200

Fits: Honda GX200 Engines Honda Clone Engines 1st Generation Predator 212cc Engines Other Details: A must have for applications above 8,000 RPMs Valves will need to be lapped in to Seats Will not fit 2nd & 3rd generation Harbor Freight...

Dual Bearing Billet Side Cover

Dual Bearing Billet Side Cover Kit Includes:  Bearings Seal Gasket O-Ring Plugs Caps  Installation Hardware Note: Due to variations in clone blocks, you may find that the side cover is not quite lining up with all four Dowell...

Stage 2: 301cc Hemi Predator / GX240-GX270 Performance Kit

Hemi Predator 301cc and the Honda GX240-GX270 Performance Kit  Kit includes: 6627 Billet Flywheel 6261 Billet Connecting Rod DJ-3055DS Dual Valve Spring Set Side Cover Gasket 3910X Spark Plug Your choice of Performance Ground...

Stage 2: 420cc Hemi Predator / GX390 Performance Kit

Hemi Predator 420cc and the Honda GX340-GX390 Performance Kit  Kit includes: 6623 Billet Flywheel 6272 Billet Connecting Rod DJ-3055DS Dual Valve Spring Set Side Cover Gasket 3910X Spark Plug Your choice of Performance Ground...

Exhaust Gasket 196cc / 212cc

Exhaust Gasket 196cc / 212cc Fiber Exhaust Gasket for Old Style 212cc Predators Stud Hole Pattern: 1-13/16"

Carburetor Inlet Gasket 1mm Thick

Carburetor Inlet Gasket 1mm Thick D Shaped Carburetor Gasket Double the Thickness of Stock Gaskets Provides more Performance and Guaranteed Seal

Side Cover Gasket .020"

Side Cover Gasket .020" Works on: Tillotson 212cc Engines Hemi / Non-Hemi 212cc Predators Honda Clone Engines Honda Engines Coleman CT200 Engines

Predator Hemi Valve Cover Gasket

Predator Hemi Valve Cover Gasket Stock replacement Valve Cover Gasket No returns on this product. If you have any questions, please call before ordering. 

Carburetor Gasket 1mm Thick

Carburetor Gasket 1mm Thick Fits 6.5HP Engines Double the thickness of Stock Gasket More Performance and Guaranteed Seal Color may vary

.010" Head Gasket: 196cc Clones, GX200

.010" Head Gasket: 196cc Clones, GX200 Viton Coated Head Gasket used to raise Compression