Engine

Vent Filter

Vent Filter Used as a Fuel Tank Vent Filter or a Valve Cover Vent Filter Fits 1/4" ID Fuel Line Dimensions: Outer Diameter of .72" Length of 1.6" Made in the USA

Stage 1 Performance Kit, Coleman 200 Minibikes

The Stage 1 Performance Kit for Coleman 200 Minibikes is the ultimate upgrade for anyone looking to enhance the power and performance of their Coleman Minibike. This kit includes a high-performance air filter, a performance exhaust system, and a jet kit...

300cc Drive Belt 856-23

TrailMaster 300cc Go Kart Drive Belt   Marked Number on the Belt: 856-23

Exhaust Silencer 1" with HD SS Clamp

Exhaust Silencer 1" with HD SS Clamp Fits 1" OD Header Pipes 7" Long   Clamp included The B91 Muffler fits the following Header Pipes:     Trumpet Header Pipe (Must cut flared tip off)     Coleman Header  ...

Rubber Air Cleaner Spacer/Gasket for 6.5HP Engines

Rubber Air Cleaner Spacer/Gasket for 6.5HP Engines Fits: 212cc Clone Engines 212cc Hemi Engines 212cc Non-Hemi Engines No returns on this product. If you have any questions, please call before ordering.

9 Tooth Arena Sprocket Kit

9 Tooth Arena Sprocket Kit Uses the 098-028 Snap Ring to attach the Sprocket to the Basket Must be run Outboard Sprocket Fits: 098-200 Baskets 098-210 Baskets 098-300A Baskets No returns on this product, if you have any questions, please...

10 Tooth Arena Sprocket Kit

10 Tooth Arena Sprocket Kit Uses the 098-028 Snap Ring to attach the Sprocket to the Basket Sprocket Fits: 098-200 Baskets 098-210 Baskets 098-300A Baskets 098-300 Baskets

Side Cover Bolt, M8x30, Hardened

Cylinder Head Bolt M8x30 Grade 8 Fits: 212cc Tillotson Engines GX200 Engines 212cc Predator Engines Honda Clone Engines No returns on this product. If you have any questions, please call before ordering. 

Cylinder Head Bolt, M8x60, Hardened

Cylinder Head Bolt M8x60 Grade 8 Fits: 212cc Tillotson Engines GX200 Engines 212cc Predator Engines Honda Clone Engines No returns on this product. If you have any questions, please call before ordering. 

Header Pipe Allen Bolts With Safety Wire

Header Pipe Allen Bolts With Safety Wire Drilled for Safety Wire Sold in a Set Fits: 212cc Tillotson Engines GX200 Engines 212cc Predator Engines Honda Clone Engines   No returns on this product. If you have any questions, please...

Open Top Steering Wheel

Open Top Steering Wheel Can be mounted Upright or Upside Down Mounts to Standard 3 Bolt Hub Comes in Black No returns on this product. If you have any questions, please call before ordering. 

ARC Billet Rod Bolts (Pair)

ARC Billet Rod Bolts (Pair) 1-1/4" LG HD Torque to 170 in/lbs High Tensile Strength Fits Billet Rods In: GX200 Engines Honda Clone 212cc Engines Predator 212cc Engines

Stud Kit: Cylinder Head

Cylinder Head Stud Kit Fits: Modified 196cc Engines Modified 212cc Engines Modified 224cc Engines Modified 225cc Engines

Clone ARC Replacement Rod Bearings

Clone ARC Replacement Rod Bearings Replacement Rod Bearings for the Tillotson,  Honda Clone, and GX200 Rod No returns on this product. If you have any questions, please call before ordering.

Predator ARC Rod Replacement Bearings

Predator ARC Rod Replacement Bearings No returns on this product. If you have any questions, please call before ordering.

Stud Kit: Side Cover

Stud Kit: Side Cover Fits: Tillotson 196cc Engines Tillotson 212cc Engines Tillotson 225cc Engines Predator 212cc Engines Honda Clone Engines Do not use this kit if you're using a Billet Side Cover Kit Includes: Studs Nuts Solid Dowel...

Short Starter Nut

Short Starter Nut Low Profile Starter Nut for a Clone or Predator Engine Allows the removal of Pull Starter Assembly and the use of an External Starter Mainly used on Modified Engines

Manifold For Mikuni VM 22 w/ Gasket

Manifold For Mikuni VM 22 w/ Gasket Description: Overall Length: 48mm or 65mm Venturi: 26mm Mounting Holes: 48mm Center to Center (Carburetor Mounting Holes are slotted so Carburetor can be twisted as needed) Comes with Mikuni Mounting Kit...

22MM Mikuni-Style Carburetor Performance Kit - Aftermarket

The 22MM Mikuni-Style Carburetor Performance Kit is an aftermarket upgrade kit designed to improve the performance of your engine's carburetor. This kit includes a top-quality VM22 carburetor, a performance air filter, and an alloy adapter, giving you...

Performance Lo & High Speed Jet for 150cc

Performance Lo & High Speed Jet for 150cc Performance Jets: 115 Hi-Speed 40 Lo-Speed Newer Engines come with EPA Carburetors that run very lean, robbing power from your engine. If you're looking to upgrade, make sure you are able to drop the...